$25.00 Inc GST
Part Number: DAM6487-S
Primary gear thrust washers are made in varying sizes to take up the play. Standard gap size should be between 3-6 thou.
This type is for the 1275cc crankshaft only which has a raised step for the primary gear to sit on. Thrust washer 0.116-118”(2.94-2.99mm)
The measurement is taken as plus or minus one to the size hence the two thou tolerance on each part number.
See DAM6486, DAM6488, DAM6489, DAM6490 and DAM6491 for alternatives.
*Secondhand Part.